EC WIRE RODS

• These are used for redrawing into Wires / Strips for manufacture of Cables, Conductors, Transformer Wires / Strips and various hardware / General Engg. Components.

SPECIFICATIONS
1. Diameter :	9.5 + 0.5 mm
2. Quality :	EC Grade as per IS 5484 in as manufactured conditions ie., M Condition
3. Mechanical properties :	8.5 to 13.6 Kg/mm2
Tensile Strength :	9 to 14% on 250 mm Gauge Length.
Elongation
4. Electrical properties :
Conductivity :	60 to 61.5% IACS
5. Coil Weight :	2000 + 250 Kgs.
6. ID :	550 mm
7. OD :	1800 mm approx.
8. Width :	900 mm

• Temper: Normally in “M” Temper, i.e.., as manufactured condition.