Alloy
Wire Rods
Aluminium Alloy Wire Rods are used for redrawing into Wires
for manufacture of all aluminium Alloy Conductors
(AAAC). Due to various advantages AAAC is replacing conventional
ACSR/AAC.
SPECIFICATIONS:
1.
Diameter :
: 9.5 mm +/- 0.5 mm
: 7.6 mm +/- 0.5 mm T4 grade Rod.
2. Quality :
Alloy AA 6201 equivalent to IS 64401 as per IS 9997 having
following
chemical composition.
ELEMENT
Si
Mg
Fe
Cu
Mn
Cr
Zn
Al |
%
COMPOSITION
0.50 to 0.90
0.50 to 0.90
0.50 Max
0.10 Max
0.03 Max
0.03 Max
0.10 Max
Remainder |
|
Temper:
Normally in “M” Temper, i.e., as manufactured condition.
3. Mechanical properties;
Tensile strength :
15 to 20 Kg/mm2
Elongation
:
7 to 11% on 250 Gauge Length
4. Electrical properties;
Conductivity :
54 to 56% IACS
5. Coil Weight
:
Varies between 1000 to 2000 Kgs. |
|
|
